Glass Breaker “Type: MLB-300”
Product Details
A tabletop device that breaks bonded substrates after scribing.
The Glass Breaker “Type: MLB-300” applies pressure to previously scribed glass substrates, etc. using a urethane hammer, and breaks substrates into requested sizes along scribed lines.
Designed to be particularly perfect for breaking bonded liquid crystal panels.
[Main Specifications]
○Break method: Pressurization via air cylinder
○Height adjustment (push volume): Manual adjustment using screw on top of main body
○Pressure adjustment: 1~5kg/cm² (Via air cylinder compression)
Product Specifications
○Break method: Pressurization via air cylinder
○Height adjustment (push volume): Manual adjustment using screw on top of main body
○Pressure adjustment: 1~5kg/cm² (Via air cylinder compression)
○Pressurization time: 1~10sec (Timer setting)
○Pressurization speed: Via air cylinder speed controller
○Hammer
→Length: 350mm
→Material: Urethane rubber
○Mat: 300mm × 300mm
○Work sending: Manual
○Work size: 300mm × 300mm
○Utilities: Power source AC100V 2A; Compressed air 0.5MPa
○External dimensions: 500mm wide × 400mm long × 320mm tall
*May vary depending on specifications.